Purchasing this product earns you: 5 points.

This small kit consists of various wires and solder that will help you get going on your modchip install. Of course we also recommend that you purchase a 15 watt soldering iron with a very thin tip. Also, flux paste (preferably water soluble) would be a great idea for some of the smaller points on the bios. It might also be worthwhile to purchase some tip tinner and cleaner so that solder flows smoothly off your soldering iron. 

This kit is good for ONE modchip installation. You may have some material left afterwards, but it is not enough for more than 1 install. The kit also consists of the following:

• 9-10 ft of 30awg kynar insulated wire (red coated)
• 1-1.5 feet of 22-24 gauge insulated wire (for the 5v and GND points)
• 7-8 inches of .032 diameter 60/40 light-duty rosin-core solder