Purchasing this product earns you: 60 points.

If you have MadCatz TE/SE SF IV stick, you've probably figured out that it costs quite a bit of cash to have 2 sticks, 1 for each system. If you're a fan of your SE stick and you've added $50+ in parts to it, it wouldn't make much sense to buy another SE for your other system and do the same thing. Just get the stick DUAL-MODDED. Same with the TE, everyone knows it's very hard to find one plus it's expensive as heck, so mod it up for both systems and you'll have one awesome stick for both your systems. From the drop-down menus, please choose the appropriate add-ons for your system. Each dual-mod will come with either a CTHULHU (for ps3/pc) or a MADCATZ 4716 PAD (360) and an IMP switch, which will allow you to change between systems by holding the GUIDE button or HOME button, real neat stuff.

SUGGESTIONS:

If you have a 360 TE/SE stick and want PS3/PC compatibility, we suggest you choose the PS3/PC CTHULHU+IMP switch add-on from the drop-down menu. This will give you the ability to play your stick on ps3, pc, 360 and include an internal switch to switch between systems.

If you have a 360 TE/SE stick and want PS3/PC compatibility PLUS other systems such as PS2/1 and GC compatibility, please choose the MC CTHULHU+IMP option. NOTE, we will install the board for you but if you're wanting actual cables installed, they will cost extra for parts/labor (i.e. you want a ps2 cable coming out of the TE or a GC cable coming out, they will cost additional, please specify this at checkout in the comments and we can notify you of costs. Usually, its $25-30 additional per cable you want installed, parts/labor.

If you have a PS3 TE/SE stick and want 360 compatibility, we suggest you choose the MADCATZ 4716 PAD+IMP switch add-on from the drop-down menu. This will give you the ability to play your stick on ps3 and 360 and include an internal switch to switch between systems.

RJ-45 MOD

(PLEASE CHOOSE THE MULTICONSOLE CTHULHU IF YOU WISH TO HAVE RJ45 MOD COMPATIBILITY AS THIS DOES NOT WORK WITH THE NORMAL CTHULHU BOARD)

The RJ-45 modification is a wonderful addition to your dual mod. Essentially we would take a Multi-console Cthulhu board and wire it up to an RJ-45 jack which would be exposed to the outside (usually takes the place of the back button and we move the back button normally to the Turbo button). You would then have an RJ-45 jack to which you could plug in modified cables to the various systems that the Multi-Console Cthulhu board accepts (Gamecube, PS2, PSX, XBOX). Overall, each cable you'd like to plug into it would have to be modified either by us or by you to accept an RJ45 jack at the end. This makes the install clean and allows you to not have several cables hanging out of your system at once. Simply plug in the cable of the system you'd like to play on, and go from there. THE DUAL MOD ASPECT OF 360/PS3 WILL REMAIN THE SAME, YOU WILL USE THE CABLE INCLUDED WITH THE TE/SE STICK FOR THESE TWO SYSTEMS AND THE RJ45 JACK FOR OTHER SYSTEMS (PS2/PSX/XBOX/GC). PLEASE CHOOSE THE EXTRA CABLES YOU'D LIKE WITH YOUR SYSTEM FROM THE DROPDOWN MENUS BELOW.

PLEASE ALLOW 1 WEEK PROCESSING ONCE WE RECEIVE THE SYSTEM FOR INSTALLATION + TESTING.